The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more. 
    

Go-Flo Water Sampler, 2.5L w/ 3-Therm. Rev. Assembly Teflon Coated

Environmental Monitoring & Research Equipment

(305) 621-2882

sales@generaloceanics.com

Go-Flo Water Sampler, 2.5L w/ 3-Therm. Rev. Assembly Teflon Coated

1080 Series GO-FLO Sampling Bottles

Weight 16.00 lbs
SKU 108002.5RT
Collection Bottle Size 2.5L
Price: $1801.00
Quantity

The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette® multibottle array, or with model AR1015 Acoustic Command Control. Inert gas can be injected into bottle to force retrieved sample out of sampling valve, directly through filter system.

The GO-FLO sampling bottle avoids sample contamination at the surface, internal spring contamination, loss of sample on deck (internal seals), and exchange of water from different depths.

Specifications:

  • Mounting: Cable clamps on 1.7 to 12 liter bottles are for cable diameters up to and including 6.4mm (1 1/4"). Clamps on larger bottles are for diameters up to and including 8.0mm (5/16").
  • Materials: Rigid PVC tube section, ball valve, handles, and cable clamp blocks. Delrin stopcocks and push rod. Stainless steel cable clamp bolts. Latex external spring, Viton and silicone O-ring seals (other materials available). Monofilament nylon and Kevlar lanyards.
  • Inert Gas Connection: Dual-purpose air vent pressure release valve with standard 9/16-18 thread for connecting inert gas line. (Operation requires additional fitting (part S1080-AFIT.)
  • End Closure: Ball valve with Viton and silicone seals.
  • Drainage: Thumbscrew air vent at top. Stopcock at base. Stopcock diameter for 1.7 to 12 liter bottles is 4.7mm (.187"). 20 and 30 liter bottles have a second, larger stopcock diameter 9.52mm (.375"). 60, 90 and 100 liter bottles have one stopcock 19.05mm (.750").

DIMENSIONS AND WEIGHTS OF THE 1080 MODEL SERIES GO-FLO WATER SAMPLING BOTTLES:

    BOTTLE CAPACITY (liters)
    1.7 2.5 5 8 10 12 20 30 60 90 100
A inch 24.7 32.5 26.5 34.5 41.0 48.0 38.0 50.0 48.0 66 72
  mm 627 826 673 876 1041 1219 965 1270 1219 1676 1822
B inch 13 13 13 13 13 13 13 13 13 19 22
  mm 330 330 330 330 330 330 330 330 330 483 559
C inch 5.75 5.75 6.75 6.75 6.75 6.75 7.87 7.87 8.0 8.0 8.0
  mm 146 146 172 172 172 172 200 200 200 203 198
D inch 3.5 3.5 5.5 5.5 5.5 5.5 8.6 8.6 12.8 12.8 12.8
  mm 89 89 140 140 140 140 218 218 325 325 325
E inch 5.5 5.5 7.5 7.5 7.5 7.5 10.7 10.7 14.8 17.0 17.0
  mm 139 139 190 190 190 190 273 273 375 382 382
F inch 7.5 7.5 9.5 9.5 9.5 9.5 12.7 12.7 17.7 17.7 17.7
  mm 189 189 240 240 240 240 323 323 425 448 448
EMPTY WEIGHT lb 8.5 9.5 15.0 17.0 21.0 22.0 41.0 47.0 77.0 94 103
  kg 3.9 4.3 6.8 7.7 9.5 10.0 18.6 21.3 35.0 43 47
FULL* WEIGHT lb 12.2 15.0 26.0 34.6 43.0 48.4 85.0 113.1 209.2 292 323
  kg 5.6 6.8 11.8 15.7 19.5 22.0 38.6 51.3 95.0 133 147
End Opening Diameter inch 1.7 2.9 4                
  mm 38.1 50.8 101.6                

*Add 0.45 kg (1 Ib) for reversing thermometer assembly. Add 0.22 (O.5Ib) for each thermometer.

Standard order includes bottles, nylon monofilament lanyards for cable or Rosette® attachment, clamps, bolts and mounting block as for model 1010 Niskin bottles. Specify bottle volume. Order messenger additionally. Order 3- and 4-thermometer-reversing assemblies additionally. Order teflon coating additionally.

COMPONENTS AND ACCESSORIES (order additionally): GO-FLO repair kit containing ball rotating key, lanyard pin, valve seat, stopcock assembly, air vent pressure release valve, O-rings, cable clamp bolt, latex tubing, PVC cement, 2 stainless steel clamps (except in kits for 20-liter or larger bottles), Nicropress clamps, misc. hardware. Specify bottle volume when ordering. O-ring seal male connector with standard thread.GO-FLO bottle O-ring kits. Specify bottle volume.

MAINTENANCE PROGRAM (MRP-2): With this program, at nominal cost per bottle, equipment may be returned for factory maintenance as follows:

  1. Inspection & thorough cleaning of all parts
  2. Replacement of O-ring seals as required
  3. Replacement of latex tubing where required
  4. Test of overall operation & watertightness
  5. Return of equipment to customer, shipping charges prepaid

Customer will be notified of any need for repairs, along with an estimate for parts and labor costs.

Upon completion of maintenance and any repairs, normal warranty on parts and labor will be renewed for another year.

REVERSING THERMOMETER ASSEMBLY MODELS 1000-3 and 1000-4

Description Non-metallic (high-impact ABS plastic) 3-thermometer (model 1000-3) and 4-thermometer (model 1000-4) reversing assemblies are easily mounted on existing bottles, or can be factory installed on new bottles. The rack portion of the assembly is removable and interchangeable.

Standard order includes reversing assembly consisting of removable thermometer rack, reversing pulley-mount saddle subassembly, and anchor block for attachment of latex drive band. Model 1000-3 3-thermometer Specify 3 or 4 thermometer capacity. Specify bottle capacity reversing assembly. for which reversing assembly is intended.