Go-Flo Water Sampler, 10L w/ 3-Therm. Rev. Assembly Teflon Coated
Description
The GO-FLO sampling bottle feature a close-open-close operation. Opens automatically (hydrostatic pressure activated) at approximately 10 meters (33 feet), then flushes until closed by standard GO Devil messenger (model 1000-MG) individually, serially, or sequentially by remote command with a model 1015 Rosette® multibottle array, or with model AR1015 Acoustic Command Control. Inert gas can be injected into bottle to force retrieved sample out of sampling valve, directly through filter system. The GO-FLO sampling bottle avoids sample contamination at the surface, internal spring contamination, loss of sample on deck (internal seals), and exchange of water from different depths. Specifications:
DIMENSIONS AND WEIGHTS OF THE 1080 MODEL SERIES GO-FLO WATER SAMPLING BOTTLES:
*Add 0.45 kg (1 Ib) for reversing thermometer assembly. Add 0.22 (O.5Ib) for each thermometer. Standard order includes bottles, nylon monofilament lanyards for cable or Rosette® attachment, clamps, bolts and mounting block as for model 1010 Niskin bottles. Specify bottle volume. Order messenger additionally. Order 3- and 4-thermometer-reversing assemblies additionally. Order teflon coating additionally. COMPONENTS AND ACCESSORIES (order additionally): GO-FLO repair kit containing ball rotating key, lanyard pin, valve seat, stopcock assembly, air vent pressure release valve, O-rings, cable clamp bolt, latex tubing, PVC cement, 2 stainless steel clamps (except in kits for 20-liter or larger bottles), Nicropress clamps, misc. hardware. Specify bottle volume when ordering. O-ring seal male connector with standard thread.GO-FLO bottle O-ring kits. Specify bottle volume. MAINTENANCE PROGRAM (MRP-2): With this program, at nominal cost per bottle, equipment may be returned for factory maintenance as follows:
Customer will be notified of any need for repairs, along with an estimate for parts and labor costs. Upon completion of maintenance and any repairs, normal warranty on parts and labor will be renewed for another year. REVERSING THERMOMETER ASSEMBLY MODELS 1000-3 and 1000-4 Description Non-metallic (high-impact ABS plastic) 3-thermometer (model 1000-3) and 4-thermometer (model 1000-4) reversing assemblies are easily mounted on existing bottles, or can be factory installed on new bottles. The rack portion of the assembly is removable and interchangeable. Standard order includes reversing assembly consisting of removable thermometer rack, reversing pulley-mount saddle subassembly, and anchor block for attachment of latex drive band. Model 1000-3 3-thermometer Specify 3 or 4 thermometer capacity. Specify bottle capacity reversing assembly. for which reversing assembly is intended. |