Plankton Nets, Bongo Frames and Accessories
Complete Plankton Net (Model 5100)
Consists of net, of appropriate size and mesh, mouth ring, 3-point bridle,
and cod-end jar or bag.
Plankton Net Close-Open-Close System (Model CC5100 series)
For opening and closing nets on messenger command at any depth. Consists of
a complete plankton net (as described above), a choker band and line for
attachment to double-trip mechanism, snapper block, plus endless loop sewn to
cod end. See diagram. The double-trip mechanism, to which the rolled plankton
net attaches, consists of the double-trip frame (1000DT), cable stop (1000-WS),
and 2 GO Devil messengers (1000MG).
Plankton Net Fabric, Size and Mesh
Net Material: Nytex netting, stabilized Dacron collar, seam
tape and thread. Double- or triple-stitched for long service under severe
sea-going conditions. No "baconing" effect in sewn seam.
Mouth diameter: 30 cm (11.8"), 50 cm (19.7"),
75 cm (29.5") or 100 cm (39.4").
Net length/mouth diameter ratio: 3/1 or 5/1. (the finer
the mesh, the longer the net should be relative to mouth opening in order to
maintain proper flow through the net).
Net and mesh formula: The model 5100 series plankton net
model indicates shape, mouth diameter, length and mesh opening of a particular
unit. For example, a conical net with a mouth diameter of 50 centimeters, a
length of 2.5 meters (5/1), and a mesh opening of 153 microns as follows:
5125153
51 (shape, 51 = conical)
2
Mouth Diameter (1=30 cms., 2 = 50 cms., 3 = 75 cms., 4 = 100 cms.)
5
Length/Diameter Ratio (3/1 or 5/1)
153 Mesh Opening
(10 to 1800 microns)
Ordering Information
Model 5100
Complete Plankton Net
Net Fabric, Size and Mesh: See
above formula.
3-point bridle:
Model
5130TPR for 30-cm mouth diameter, 5150TPR for 50-cm, 5175TPR for 75-cm, and
5100 TPR for 100-cm mouth diameters.
Net mouth ring:
Model 5100 for 30-cm mouth net, 5120 for 50-cm, 5125 for 75-cm, and 5140
for 100-cm mouth diameters. Specify brass or stainless steel.
Model
5100CEJ-A Cod End Jar Assembly:
Standard order includes 1-liter
polyethylene jar, PVC ring, hose clamp (to attach to cod end of net) and screw
top.
Model 5100CEB Controlled-flow cod end bag:
Zipper collar sewn to cod end of net.
Model 2030R
Digital Flowmeter:
Precision impeller instrument mounts in net
mouth. Model 2030R (mechanical) or model 2031H (electronic) may be used. See
data sheet 2030/2031/2035.
Model CC5100 Plankton Net
Close-Open-Close System
Complete plankton net (model 5100) as described
above, plus:
Model 1000-DT Double-trip close-open-close
mechanism:
Device with two release positions individually
actuated by two successive GO Devil messengers from the surface. Standard
order includes double-trip mechanism frame (1000-DT), two GO Devil messengers
(1000-MGT) and cable stop (1000-WS).
Choker band and line
for purse-string closure:
Model 5130CR (for 30-cm and 50-cm
diameter nets).
Model 5175CR (for 75-cm and 100-cm diameter nets).
Specify
net mouth size.
Model 5100-SB Snapper block:
Secures rolled net to cable until messenger actuation.
Model 5100-EL Endless loop.
Model 2030R Digital flowmeter
Bongo
Towing Frames and Nets
Model BF20CM towing frame: 20-cm (8")
I.D., two PVC pipe sections joined by stainless steel yoke to connect with tow
cable between two cable stops.
Model BF61CM towing frame:
61-cm (24") I.D., two hand-wrapped cylinders of fiberglass and polyester
resin joined by stainless steel yoke and towing eye assembly.
Model
BN Cylinder Cone Bongo Nets
(5:1 net length/mouth diameter)
BN20-0500F
Bongo Net, 500-micron mesh, 20cm (8") mouth diameter
BN20-0333F
Bongo Net, 333-micron mesh, 20cm (8") mouth diameter
BN61-0500F
Bongo Net, 500-micron mesh, 61cm (24") mouth diameter
BN61-0333F
Bongo Net, 333-micron mesh, 61cm (24") mouth diameter
Note:
Bongo nets are secured to Bongo Towing Frame using Stainless steel hose clamps.
Return to the Product
Catalog.