COUPLING
CLAMP FOR MARKIII CTD. (C1015-NB-2) Used to mount the CTD to
models 1015/1016/1017 Rosette water sampler. Holds the CTD in a vertical position below the Rosette.
Depending on the size of the Rosette a mount stand extension may be necessary to provide clearance.
Cast bronze 7" (17.8cm) I.D. with 4 stainless steel rods and
hardware. Models also available for Seabird and Falmouth Scientific Models
Universal
Mounting Bracket. (C1015-MB-2) Used to mount a CTD or other
instrument is a cylindrical case to our 1015/1016/1017 Rosette water sampler
in place of a sampling bottle. Holds the instrument in a vertical position
on the side of the Rosette in place of a bottle. Anodized aluminum
frame and mounting blocks, PVC spacer and nylon straps. Please
specify instrument diameter when ordering. Width 3" (7.6cm)
Length 14" (35.5cm).
COUPLING
CLAMP FOR Idronaut CTDs. (C1015I75) Used to mount the CTD to
models 1015/1016/1017 Rosette water sampler. Holds the CTD in a vertical position below the Rosette.
Depending on the size of the Rosette a mount stand extension may be necessary to provide clearance.
Anodized Aluminum 2.95" (75mm), 3.5" (89mm) or
3.9"(100mm) I.D. with 4 stainless steel rods and
hardware.
Universal
Mounting Bracket for Mini Rosettes. Used to mount a CTD or other
instrument is a cylindrical case to our 1014 Mini and Light Weight Rosette water sampler
in place of a sampling bottle. Holds the instrument in a vertical position
on the side of the Rosette in place of a bottle. Anodized aluminum
frame and mounting blocks stainless steel straps. Width 2"
(5 cm)
Length 12" (30.5cm).
Return to the Product Catalog.