Model 2135D/2031 Series

 

Flowmeter Interface Module

And Electronic Flowmeter

 

Introduction

The Model 2135D Flowmeter Interface Module and 2031H Electronic Flowmeter, are used for open channel flow monitoring applications. The 2135D Module and 2031H Flowmeter are connected to a computer or data logger (user supplied), with a serial interface port.

   

  

The 2135D Flowmeter Interface Module comes complete with 10 meters of underwater cable (longer extension cables are available if necessary), and Flow-Soft application Software.

The 2135D can also be used with a wide variety of PDAs and Pocket PCs. If the device you wish to interface has a standard RS232 cable, chances are you will be able to use it with the 2135D.

 

Applications Include:

Irrigation Channels, Effluent Monitoring, Waste Water Treatment, Industrial Discharge Measurement, Ocean, Lake, River and Stream Flow Measurement.

 

Flow-Soft Application Software

 

Features                                           

·         Real- time display

·         Automatic storing of acquired data sets to log file.

       Parameters: Elapsed Time, Distance, Velocity.

·         GPS (Global Positioning System) input and data storage capability.

·         Automatic serial communication setup.

·         User selectable rotor type, speed and distance units.

·         Export Data Feature- Saves the file for importing into a spread sheet such as Excel.

 

 

Minimum PC Requirements

Operating system:                Microsoft Windows 98 or later

Memory:                                64 MByte

CDROM:                                Required

Disk:                                       >1 GByte

Monitor:                                                Color display

Graphical display:                resolution 800x600 or higher

Serial or USB ports:             2 (Note: If the GPS option is not used, only one serial or USB port is necessary.)

Printer Port:                           1

 

Specfications

Range and threshold :

-Model 2031H (standard rotor)

Threshold‑ 10cm/sec (1/5 Knot)

Range ‑ 10 cm/sec (1/5 Knot) to 6.5 M/sec (13 knots)

 

-Model 2031HR6 (low speed rotor)

Threshold 6 cm/sec (3/25 Knot)

Range ‑ 6 cm/sec (3/25 Knot) to 100 cm/sec (2 Knots)

Velocity‑ 0 to 999.9 m/sec, cm/sec, ft/sec or Knots

Distance-Accumulative to 131072 meters

  

 Note: When using FlowSoft Application Software, the distance and elapsed time are unlimited.
 

Elapsed Timer – 23 hours, 59 Minutes, 59 seconds

 

Accuracy‑ +/‑ 1% Full Scale

Enclosure –ABS housing.

Communications RS232C interface.

Battery Supply ‑ 9 volt alkaline battery.  Minimum of 72 hours of continuous use.
 

Note: The battery may not be necessary as long as power is provided from the serial port.

                                                         

        General Oceanics Inc.                     Tel: (305) 621-2882

                                    1295 N.W. 163 Street                                                           Fax: (305) 621-1710

                                       Miami, Florida 33169                                                           E-mail: sales@GeneralOceanics.com

                                                                                                                                       http://www.GeneralOceanics.com