Model 2135 Digital Flowmeter & Display

 
2135 Electronic Display2031H Electronic Flowmeter

Model 2031/2135 series
Electronic Flowmeter and Readout

The model 2135 readout is a real time hand held microprocessor controlled data acquisition unit. When used in conjunction with our flowmeter sensor, this battery operated waterproof unit displays current velocity in cm/sec, ft/sec. m/sec, or knots. The easy-to-read two line liquid crystal display also gives you total distance traveled. The microprocessor based unit provides an event timer with external start/stop freeze display switch.

The 8 oz. flowmeter sensor Model 2031H is made of rugged non-corrosive materials, measures flow rates from 2cm/sec to 7.9 m/sec, is self-orienting and has unlimited depth capabilities. Optional 128k memory, RS-232 and software for data recording.

2031H Series Electronic Flowmeter

Weight in Air: 225 grams (8 ounces).
Weight in Water: 113 grams (4 ounces)
Materials: Celcon rotor. Nickel-plated brass nose cone. Polycarbonate body. Armaloyed stainless steel main rotor and idler gear shafts.
Dimensions: 21.3 cm (8 3/8") overall length.
Standard rotor diameter: 6.98 cm (2 3/4").
Low-speed rotor diameter: 16.5 cm (6 1/2").
Depth Rating: Unlimited (free flooding).
Data Readout: Six 10-digit counter wheels reading 000000 to 999999. Ten counts per rotor revolution, non-resetting. Read by noting difference in beginning and end readings. (counter advances through 000000).
6-Digit Full Scale Counter: 999999 counts equals approximately 14.5 nautical miles.
Mounting: Universal bridle allowing single-point connection for towing or two-point connection within net mouth.
Response with Standard Rotor (Model 2031H) Threshold: Approximately 10 cm/sec (1/5 knot).
Range: Approximately 10 cm/sec (1/5 knot) to 7.9 meters/sec (15 knots).
Response with Optional Rotor (Model 2031HR6) Threshold: Approximately 6 cm/sec (3/25 knot).
Range: Approximately 6 cm/sec (3/25 knot) to 100 cm/sec (approximately 6 knots).

Standard Order (2031H series)
Standard order of Model 2031H series electronic flowmeter includes rotor (specify standard or low-speed rotor), universal bridle and "pigtail" (short length of cable and underwater connector for connection to readout cable). Order readout (Model 2135) additionally.

Model 2135 Data Readout

Weight: ..45 Kg (1 lbs) . Batteries included
Dimensions: Height - 22.8 cm (9.0 in.), Width - 11.4 cm (4.5 in.), Depth - 4.4 cm (1.75 in.)

Data Readout: .

Velocity‑ 0 to 9999 m/sec, cm/sec, ft/sec or Knots

Distance-Accumulative to 65,635 meters**

Elapsed Timer – to 9 hours, 59 Minutes, 59 seconds

Operating Temperature ‑ 0 to 50 Degrees Celsius

Accuracy‑ +/‑ 1% Full Scale

Weight‑ .45 Kg (1 lb) . Batteries included.

Dimensions          -Length: 23.3cm   (9.2 in)   

                              ‑ Width: 11.5 cm  (4.5 in)

      ‑ Depth:    4.5 cm (1.75 in)

Display‑ Two line, 32 character, high contrast super twist LCD

Enclosures – Standard water resistant  (NEMA 4) ABS housing.

Memory ‑ 256 kilobytes (optional). Approx. 200,000 readings.*

   

Battery Supply ‑ Four 1.5 volt AA Manganese‑alkaline batteries.

(Duracell MN‑1500 or equivalent.) Minimum of 150 hours of continuous use.


Memory Option:  "F" RAM capable of storing approximately 200,000 samples. Includes Flow-Soft software.
Enclosure: Waterproof  (NEMA 4) ABS housing (nylon shoulder strap included)
Power:   Four 1.5 volt AA Manganese-alkaline batteries. (Duracell MN-1500 or equivalent.) Approximately 300 Hrs. of continuous use