Model 1010C Series
DESCRIPTION
The Model 1010C Convertible Niskin Sampling Bottle is a non-metallic, free-flushing sampling bottle activated by GO Devil messengers (1000-MG) when attached to a cable/rope. The adjustable overhead bail allows the sampling bottle to be used in the vertical or horizontal position. The lowering line passes through the push-rod (release) cap to insure positive activation by the messenger. Quick release pins facilitate easy change from the vertical to horizontal sampling positions without change of the lanyard length.
SPECIFICATIONS
Mounting: Cable clamps on the bottles are for cable/rope diameters up to and including 1/4 inch (6.4mm).
Material: Non-metallic construction of PVC tube section, end stoppers, handles and cable clamp bail. Delrin stopcocks, air vent screw and push rod. Stainless steel push rod return spring, cable clamps and fasteners. End stopper closure band of latex tubing. Buna-N O-ring seals (other materials available). Nylon monofilament lanyards.
End Closure: Stoppers with spherical section sealing surfaces held firmly against O-ring seals by internal latex tubing.
Drainage: Thumbscrew air vent at top. Stopcock at base: 4.7mm (.187"). Sizes: 1.7 and 2.5 liter bottles. Optional: Stainless steel spring with teflon or epoxy coatings.
STANDARD ORDER Standard order includes bottle, clamp bolts for attachment on cable/rope. Specify bottle size. Order messenger separately. Order teflon coating separately. Latex tubing is the standard bottle-closing mechanism; Stainless steel spring may be ordered with teflon or epoxy coating.
COMPONENTS AND ACCESSORIES
GO DEVIL MESSENGER Model 1000MG Can be used with a wide variety of underwater instruments requiring MESSENGER activation. Snaps on cable\rope with one hand. Accommodates cables up to 1/4 inch (6.4mm). The slot may be enlarged to 3/8 inch as a special order. Made of cast bronze with stainless steel latch shaft and spring. Teflon coating is available. Weight 1.9 lbs. (.88kg). Height 2.5 inches (6.3cm) Diameter 2 inches (5.1cm).
REPAIR KIT: Model S1010KAA containing end plug, stopcock assembly, air vent screw, 2 cable clamps, latex tubing, PVC cement, O-rings, 2 stainless steel clamps, brass snap, nicropress clamps and miscellaneous hardware. Specify bottle capacity when ordering kit. Niskin model 1010 bottle O-ring kits. Specify bottle capacity. Other parts and assemblies also available.
MAINTENANCE PROGRAM MRP-2 With this program, at nominal cost per bottle, equipment may be returned for factory maintenance as follows:
(1) inspection & thorough cleaning of all parts,
(2) Replacement of O-ring seals as required,
(3) Replacement of latex tubing where required,
(4) Replacement of end-stopper lanyards as needed
(5) Test of overall operation & watertightness, (6) return of equipment to customer, shipping charges prepaid.
Customer will be notified of any need for repairs, along with an estimate for parts and labor costs.
Upon completion of maintenance and any repairs, the normal warranty on parts and labor will be renewed for another year.
*Covered Under One or More of the following U.S. and International Patents: 232,922; 235,422; 245,483; 245,484; 245,485; 245,486; 245,487; 612,482; 3,044,811; 3,102,743; 3,155,174; 3,242,740; 3,339,417; 3,372,585; 3,412,498; 3,425,664; 3,489,012; 3,489,987; 3,537,062; 3,688,433; 3,729,855; 3,793,889; 3,815,422; 3,836,120; 3,869,913; 3,937,078; 3,955,412; 3,969,925; 3,970,156; 3,971,251; 3,986,635; 4,026,148; 4,037,477; 4,091,666; 4,091,676; 4,106,751; 4,295,675; 4,301,995; 4,302,974; 4,307,605; 4,347,751; 4,350,931; 4,417,718; 4,492,363; 4,545,243; 4,593,570; 4,690,380; 4,708,321; 4,744,256; 4,750,574; 4,852,413.
Technical data subject to change without notice. 1011-4/91
Return
to the Product
CatalogCatalog.